Product Description
Supply Ability
Supply Ability
500 Metric Ton/Metric Tons per Month
Packaging & delivery
Packaging Details
Standard seaway packing or as client required.
Port
HangZhou
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
|
C |
Si |
Mn |
P |
S |
Cr |
V |
W |
Mo |
Co |
|
1.00~1.15 |
≥0.65 |
≥0.40 |
≥0.030 |
≥0.030 |
3.50~4.50 |
0.95~1.35 |
1.15~1.85 |
9.0~10.0 |
7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
Report Suspicious Activity!
Overview
Essential details
Steel Grade:
W2Mo9Cr4VCo8
Standard:
AiSi, ASTM, bs, DIN, GB, JIS
Place of Origin:
China
Model Number:
M42
Technique:
Cold Drawn
Application:
Tool Steel Bar
Alloy Or Not:
Is Alloy
Special Use:
Mold Steel
Type:
Alloy Steel Bar
Tolerance:
0~+1mm
Processing Service:
Cutting
Grade:
W2Mo9Cr4VCo8
surface:
black or machined
type:
high speed steel
most used:
steel shaft
Supply Ability
Supply Ability
500 Metric Ton/Metric Tons per Month
Packaging & delivery
Packaging Details
Standard seaway packing or as client required.
Port
HangZhou
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
|
C |
Si |
Mn |
P |
S |
Cr |
V |
W |
Mo |
Co |
|
1.00~1.15 |
≥0.65 |
≥0.40 |
≥0.030 |
≥0.030 |
3.50~4.50 |
0.95~1.35 |
1.15~1.85 |
9.0~10.0 |
7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
Supply Ability
Supply Ability
500 Metric Ton/Metric Tons per Month
Packaging & delivery
Packaging Details
Standard seaway packing or as client required.
Port
HangZhou
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
|
C |
Si |
Mn |
P |
S |
Cr |
V |
W |
Mo |
Co |
|
1.00~1.15 |
≥0.65 |
≥0.40 |
≥0.030 |
≥0.030 |
3.50~4.50 |
0.95~1.35 |
1.15~1.85 |
9.0~10.0 |
7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
| Products Name | Carbon Steel Bar | |
| Steel Grade | Q195,Q235,Q345, 45#, S20C , SAE1571,SAE1571,SAE1045,EN8,EN19,C45,CK45,SS400 etc | |
| Standard | ASTM A 615 Gr 40/60,BSS4449 Gr460B,500B etc | |
| Diameter | 6mm-1200mm | |
| Length | 3000mm-12000mm or as client’s request | |
| Straightness | 3mm/M max | |
| Tolerance | +0.5mm/-0(dia),+5mm/-0(L) | |
| MOQ | 1 tons | |
| Heat treatment | Normalized / Annealed / Quenched / tempered | |
| Surface | black,mill,polished,brush,etc | |
| Test | Ultrasonic test according to SEP 1921-84 G3 C/c | |
| HS Code | 72210000,72221100,72222000,72223000 | |
| Application | Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20′ 40′ container), parts of larger cross-sections, crankshafts, gears. | |
| Trade Term | FOB, CFR, CIF | |
| Payment | 30% advance by T\T; Balance pay before the shipment against shipping documents or irrevocable LC at sight | |
| Packaging | Export standard, seaworthy | |
| Delivery time | 10-20days after confirmed order | |
| Loading port | ZheJiang port , ZheJiang port or as client’s request | |
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) | |
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) | ||
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) | ||
| Item Type | Diameter (MM) | Length |
| Round Bar | 8~400 | 6/9/12m or follow client’s requirment. |
| Steel Wire Rod | 5.5~34 | Coil |
| Steel Rebar | 5.5~40 | Cut to length or Coil |
| Remark |
We are sure that we can establish good relationships, feel free to contact us We are sure to satisfy you with our profeessional information. Don’t hesitate to contact us. |
|
Product Description
|
Standard |
JIS / ASTM / GB / DIN / EN /AISI |
|
Material |
Cr12mov H13 SKD11 SKD6 D2 DC53 7CrSiMnMoV 1.2344 1.2379 4Cr13 P20 2738 B40 5CrNiMo 5CrMnMo |
|
Diameter |
80-400mm |
|
Length |
400-6000mm or be required |
|
Technique |
Hot Rolled / Forged / Cold Drawn |
|
MOQ |
5tons |
|
Packing |
In bundles tied with steel stripes or as request |
|
Payment terms |
L/C at sight or T/T (30% as deposit) |
|
Delivery time |
Usually 7-15 dyas, or CZPT negotiation |
|
Samples |
Free samples are provided but the fright is paid by the buyer |
| Type: | Round |
|---|---|
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
| Composition: | Stainless Steel Scrap |
| Technique: | Hot Rolled |
| Shape: | Bar |
| Surface Treatment: | Polished |
| Samples: |
US$ 5/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Replace the Drive Shaft
Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
Repair damaged driveshafts
If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
Learn how drive shafts work
While a car engine may be one of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is one of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
Common signs of damaged driveshafts
If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be one of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When one or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.
editor by CX 2023-06-12
China supplier Sitrak C7h Intermediate Axle Drive Shaft Az9557310685 drive shaft yoke
Product Description
SITRAK C7H INTERMEDIATE AXLE DRIVE SHAFT AZ9557310685
Product range:
| Product Name | Heavy Duty Truck Parts |
| Brand | HOWO/Sinotruk/Shacman/FAW/Foton/Auman/Beiben |
| Quality | Top Class |
| Packing | Standard Packing |
| Leading time | 15 days-30 days For Bulk orders |
| Small delivery | 3 days |
| Payment term | 30% of Invoice amount by T/T as Deposit, balance before shipment. L/C is acceptable if the order amount is more than US$500,000.00 |
Detail Picture:
Our store house:
Shipment and delivery for parts:Our company instruction:
Qinddao CZPT Import And Export Co.,Ltd. is professional perfomance truck parts supplier. Our registered trademark is”SATA”.We have been equipped with advanced manufacturing and testing facilities and had been certificated with ISO9001:2015.Due to goodquality and first-rate service, we have established firm and friendly cooperation with many customers all around the world, including Europe, America, Middle East etc. With the management principle of “Equipped with high technology, succeeded with high quality”.We long for more potential clients,more opportunities to step forward,and we hope to create a better future.As a business partner, SATA is your best choice!
Our advantage and service:
1. OEM Manufacturing welcome: Product, Package…
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After parts delivery, we will track the products for you once every 2 days, until you get the products. When you got the products, please test and
give us feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQ:
Q: How long is your delivery time?
A: For regular models we have in stock, within 2 days after payment. For custom models or very large quantities, please negotiate.
Q: Are you a trading company or a manufacturer?
A: We are a professional trucks and parts supplier of factory agent with more than 15 years of experience. Welcome to visit our company.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. However, the shipping cost is your responsibility.
Q: What is your after-sales service and warranty?
6 or 12 months warranty from date of receipt; replacement product will be shipped with your next order.
Q: Do you accept ODM and OEM orders?
A: Yes, we provide ODM and OEM services to customers all over the world. We can customize different styles, sizes and different brands of shells.
Q: Can you print our logo on the bearing and pack it with our brand?
1. We can print your trademark (logo) on shield or laser.
2. We can design your package according to your requirements. 3. The copyright belongs to the customer, and we promise not to disclose any information.
| After-sales Service: | Guaranteed |
|---|---|
| Warranty: | 6 Month |
| Type: | Chassis |
| Certification: | ISO9001 |
| Driving System Parts: | Front Axle |
| Electrical System Parts: | Starting System |
| Customization: |
Available
| Customized Request |
|---|
How to tell if your driveshaft needs replacing
What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.
unbalanced
An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
unstable
When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.
Unreliable
If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
Unreliable U-joints
A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.
damaged drive shaft
The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
Maintenance fees
The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.
editor by CX 2023-05-25
China high quality ISO Audited Supplier SWC Series Cardan Drive Shaft for Industry with High Performance drive shaft axle
Product Description
ISO Audited Supplier SWC Series Cardan Drive Shaft For Industry With High Performance
Product Description
| structure | universal | Flexible or Rigid | Rigid | Standard or Nonstandard | Nonstandard |
| Material | Alloy steel | Brand name | HangZhou XIHU (WEST LAKE) DIS. | Place of origin | ZheJiang ,China |
| Model | SWC Series | Raw materials | heat treatment | Length | depend on model |
| Flange DIA | 160mm~620mm | Nominal torque | depend on model | coating | heavy duty industrial paint |
| Paint clour | customization | Application | Industrial Equipments | OEM/ODM | Available |
| Certification | ISO,TUV,SGS | Price | calculate according to model | Custom service | Available |
Packaging & Delivery
Packaging details:Standard plywood case
Delivery detail: 15 -20 working days,depend on the actual produce condition
FAQ
Q1: What is the location of your company?
A1: Our company is located in the HangZhou City ,ZheJiang ,China.Welcome to visit our factory at anytime!
Q2: How does your factory do regarding quality control?
A2: Our standard QC system to control quality.
Q3: What is your delivery time?
A3: Usually within 25 days after the receipt of payment.Delivery time must depend on the actual produce condition.
Q4: What are your strengths?
A4: 1.We are the manufacturer,having competitive advantage in price.
2.A large part of money is put into advancing CNC equipments and product
R&D department annual,the performance of cardan shaft can be guaranteed.
3.About quality issues or follow-up after-sales service,we report directly to the boss.
4.We have the ambitions to exploring and developing the world’s cardan shaft market and
we believe we can.
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Hollow Axis |
| Customization: |
Available
| Customized Request |
|---|
What is a drive shaft?
If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from one side. If it only happens on one side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.
The drive shaft is a mechanical part
A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the two parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.
It transfers power from the engine to the wheels
A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.
It has a rubber boot that protects it from dust and moisture
To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
it has a U-shaped connector
The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the two components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.
it has a slide-in tube
The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the two components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
It uses a bearing press to replace worn or damaged U-joints
A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If one of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.
editor by CX 2023-04-18
China supplier Auto Spare Parts CV Axle Shaft No. My-A06 Used for CZPT EQ240 High Quality Gear Axle Joint Drive Shafts Agriculture Drive Shaft drive shaft axle
Solution Description
Merchandise Description
Enhancement – double common joint bearing
One common joint bearing
This item is employed for Xihu (West Lake) Dis.feng Truck EQ240 chassis . Our innovation brings increased turning radius and other benefits to the shaft. It has larger performance and good quality relying on our unique method items. We acknowledge custom-made advancement and innovation dependent on drawings and samples.
Business Profile
HangZhou CZPT Automobile Components Production Co., Ltd. – focuses on the OEM creation of chassis elements of cars, vans, agricultural equipment and engineering equipment for much more than 15 years.
FAQ
Q: Which payment conditions will you take?
A: We can settle for TT, Western union, paypal and money etc
Q: When my get will be shipped?
A:When we get payment, we will ship your purchase inside twenty operating times.
Q: Which shipping and delivery will you supply?
A:By sea, air, DHL, Fedex, TNT, UPS, EMS, SF
Q: How lengthy does it get to my tackle?
A:The typical shipping and delivery time is 20days, depending on which region you are in.
Q: How can I trace my get?
A:We will send you the monitoring variety by e-mail.
Q: If I am not pleased with the items, what should I do?
A:You can speak to us and explain to us about your difficulty. We will offer exchange or mend services beneath guarantee.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated|
|
|---|
| Material: | 40cr Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Why Checking the Drive Shaft is Important
If you hear clicking noises while driving, your driveshaft may need repair. An experienced mechanic can tell if the noise is coming from one side or both sides. This problem is usually related to the torque converter. Read on to learn why it’s so important to have your driveshaft inspected by an auto mechanic. Here are some symptoms to look for. Clicking noises can be caused by many different things. You should first check if the noise is coming from the front or the rear of the vehicle.
hollow drive shaft
Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.
Cardan shaft
Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or “Cardan” prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it’s a good choice for raising and lowering jeeps.
universal joint
Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don’t require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.
Refurbished drive shaft
Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don’t wait another minute – it can be very dangerous.
The cost of replacing the drive shaft
The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it’s a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.
editor by CX 2023-04-13
China China Factory Good Quality Truck Spare Parts Drive Shaft Transmission Shaft Propeller Shaft supplier
Merchandise Description
Product Description
|
Firm Profile
HangZhou Xihu (West Lake) Dis. Machinery Manufacture Co., Ltd., situated in HangZhou, “China’s ancient copper capital”, is a “national higher-tech enterprise”. At the beginning of its establishment, the company adhering to the “to give consumers with high high quality items, to provide timely services” notion, adhere to the “every thing for the consumer, make client superb supplier” for the mission.
Certifications
Q: Where is your firm situated ?
A: HangZhou ZheJiang .
Q: How could l get a sample?
A: Ahead of we received the 1st purchase, you should afford the sample price and express payment. we will return the sample price back
to you inside your 1st get.
Q: Sample time?
A: Current products: inside 20-sixty days.
Q: Whether or not you could make our manufacturer on your items?
A: Sure. We can print your Emblem on equally the goods and the packages if you can meet our MOQ.
Q: How to guarantee the high quality of your goods?
A: 1) stict detection during production. 2) Stringent fully inspecion on products before shipment and intact solution
packaging ensured.
Q: lf my drawings are protected?
A: Yes ,we can sign NDA.
|
US $10-150 / Piece | |
5 Pieces (Min. Order) |
###
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | OEM/ODM/Customized |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | OEM/ODM/Customized |
###
| Customization: |
Available
|
|---|
###
###
###
###
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
